szmz posted on 2022-11-17 14:38:47

I2C pull up resister

I2C pull up resister

1st,
    get firmware info by Bootloader app
    GinkgoOne inlcudes the Bootloader app.
    http://www.viewtool.com/demo/Ginkgo/Software/GinkgoOne_Setup_v1.1.10_x86.zip

2. Methods of setting different pull-up resistances for different products：
   Ginkgo III ：
   

   Mini I2C：
   

   2.3 Ginkgo:
       2.3.1, HW version 2.2.0:
      

       2.3.2. HW version 2.1.0:
      
       Connect the clock and data of the channel to pin5 or pin7 respectively.
       If you need the Alert pin of the PMBus, you can also use pin3.


Page: [1]
View full: I2C pull up resister